Ελληνικά


 

 

 

Standard Equipment

 

  • Firm metallic structure.
  • Working area 0.45m x 0.65m.
  • Servo motors at all axis.
  • 8 bearings support the bridge, 4 bearings at each side (be aware  that most machines use only 2 bearings at each side).
  • Special system guarantees the perfect engage between rack and pinion.
  • All moving parts are covered by special items, limited need for maintenance.
  • Accurancy (via mathematical equations) 0.000098mm and 0.00000585mm (according to encoder).
  • Accuracy measured with a digital instrument 0,03mm.
  • Repeatability 0,0009625mm.
  • Smallest axis movement 0.001mm.
  • Moving and operating speed 10m/min.
  • Bearings at all axis.
  • All cables are protected by energy chains.
  • Digital switches at all axis.
  • Special cables with reduced EMC noise.
  • Special covers at the end of the working area keep the dust away from the moving parts.
  • Spindle with SKF bearings.
  • Spindle power 4hp, 24.000rpm.
  • Spindle is controlled via inverter and keeps the speed steady even under pressure.
  • Spindle speed in controlled via the operating software.
  • Control made out of  ΑΒΒ electronics.
  • Special engraved clamping table.
  • Embedded PC with a 19'' touch screen at a stand alone control.
  • Machine can operate in  2D, 2,5D & 3D.
  • The operating software inspects the machine at all times and outputs error messages displaying where the fault is.
  • The software generates 2D, 2,5D G-code out of DXF files.The user can choose between : Drill, pocket, engrave, offset with tool radius compensation.
  • Spindle speed and cutting speed can be adjusted even when the machine is in operation.
  • The software reads operating speeds and spindle speeds from the G-code.
  • During operation the machine can be paused or stopped and then it can continue the operation from the same point.
  • Emergency buttons.
  • Can operate in any material such as wood, plastics, metals, stones.
  • Low power consumption.
  • Almost zero maintenance needed.
  • Power 380V 3-phase.
  • Weight 800kg.

 

Optional Extras

 

  • Dust suction.
  • Special suction foot, it  locks and unlocks earry easy and quick so the tool change will be a matter of seconds.
  • CAM software for 3D operations
  • Spindle with auto tool change.

     

     


      Machine dimensions (LxWxH)
     1.6m x 1m x 1,8m (with the door closed)
    work area (LxWxH)  455mm x 650mm x 200mm 
    Smaller step (X,Y,Z) 0,001mm
    Accurancy (X,Y,Z) <0,03mm
    Spindle power without ATC   4hp, 5000-24000rpm
    Warranty 12 months

     

     

     

     

     

     

     

     

     

     

    watch more video here 

    see samples here

 

Custom Made Machines

Custom Made

 

 

 

 

 

 

 

 

more....