Standard Equipment

• Firm metallic structure.
  
• Working area 0.45m x 0.65m.
• Servo motors at all axis.
• 8 bearings support the bridge, 4 bearings at each side (be aware  that most machines use only 2 bearings at each side).
  
• Special system guarantees the perfect engage between rack and pinion.
  
• All moving parts are covered by special items, limited need for maintenance.
• Accurancy (via mathematical equations) 0.000098mm and 0.00000585mm (according to encoder).
• Accuracy measured with a digital instrument 0,03mm.
  
• Repeatability 0,0009625mm.
  
• Smallest axis movement 0.001mm.
• Moving and operating speed 10m/min.
• Bearings at all axis.
  
• All cables are protected by energy chains.
• Digital switches at all axis.
  
• Special cables with reduced EMC noise.
  
• Special covers at the end of the working area keep the dust away from the moving parts.
• Spindle with SKF bearings.
• Spindle power 4hp, 24.000rpm.
• Spindle is controlled via inverter and keeps the speed steady even under pressure.
  
• Spindle speed in controlled via the operating software.
  
• Control made out of  ΑΒΒ electronics.
  
• Special engraved clamping table.
  
• Embedded PC with a 19'' touch screen at a stand alone control.
  
• Machine can operate in  2D, 2,5D & 3D.
• The operating software inspects the machine at all times and outputs error messages displaying where the fault is.
  
• The software generates 2D, 2,5D G-code out of DXF files.The user can choose between : Drill, pocket, engrave, offset with tool radius compensation.
• Spindle speed and cutting speed can be adjusted even when the machine is in operation.
• The software reads operating speeds and spindle speeds from the G-code.
• During operation the machine can be paused or stopped and then it can continue the operation from the same point.
• Emergency buttons.
• Can operate in any material such as wood, plastics, metals, stones.
• Low power consumption.
• Almost zero maintenance needed.
• Power 380V 3-phase.
• Weight 800kg.

Optional Extras

• Dust suction.
  
• Special suction foot, it  locks and unlocks earry easy and quick so the tool change will be a matter of seconds.
• CAM software for 3D operations
  
• Spindle with auto tool change.
  

   

   

  Machine dimensions (LxWxH)	1.6m x 1m x 1,8m (with the door closed)
  work area (LxWxH)	455mm x 650mm x 200mm
  Smaller step (X,Y,Z)	0,001mm
  Accurancy (X,Y,Z)	<0,03mm
  Spindle power without ATC	4hp, 5000-24000rpm
  Warranty	12 months

   

   

   

   

   

   

   

   

   

   

  watch more video here 

  see samples here