Ελληνικά


P3015

 

 

 

 

 

 

 

cnc plasma παντογραφος LNV CNC

 

 

cnc plasma παντογραφος LNV CNC

 

 

 

Plasma CNC Machine

 

Standard Equipment

 

  • Firm metallic structure.
  • Working area 3.1m x 1.6m.
  • Fumes suction.
  • Servo motors at all axis.
  • 2 servo motors at Υ axis 
  • 1 servo motor at Χ
  • 1 servo motor at Ζ
  • 8 bearings support the bridge, 4 bearings at each side (be aware  that most machines use only 2 bearings at each side).
  • Special system guarantees the perfect engage between rack and pinion.
  • All moving parts are covered by special items, limited need for maintenance.
  • Accurancy (via mathematic equasions) 0.00108mm and 0.000435mm (acording to encoder)
  • Repeatability 0,0009625mm.
  • Accurancy measured with a digital instrument 0,05mm.
  • Smallest axis movement 0.001mm.
  • Moving and operating speed 20m/min.
  • Bearings at all axis.
  • All cables are protected by energy chains.
  • Digital switches at all axis.
  • Special cables with reduced EMC noise.
  • Special covers at the end of the working area keep the dust away from the moving parts.
  • Control made out of  ΑΒΒ electronics.
  • Special table made out from blades that are easy to be replaced after extended wear.
  • Embedded PC with a  19'' touch screen at a stand alone control tower.
  • The operating software inspects the machine at all times and outputs error messages displaying where the fault is.
  • Cutting speed can be adjusted even when the machine is in operation.
  • The software reads operating speeds and spindle speeds from the G-code.
  • During operation the machine can be paused or stopped and then it can continue the operation from the same point.
  • Emergency buttons.
  • Low power consumption.
  • Almost zero maintenance needed.
  • Power 380V 3-phase.
  • Weight 1200kg.

 

Optional Extras

 

  • CAM software for 2D operations.
  • DTHC (Digital Torch Height Control) system that measures the distance between the torch and the sheet and keeps it steady during operation in order to achieve quality cut.  


 

 

work area (LxWxH) 3,3m x 1,8m
Precision (X,Y,Z) 0,05mm
Repeatability precision 0,00096mm
Maximum operating speed  20.000mm/sec
Motor power servo system
Cutting thickness up to 80mm
power supply 380V/220V
Table knife table and fume vacuum
control onboard pc with touch screen
   
Weight 1200kg


 

video here 

 

Custom Made Machines

Custom Made

 

 

 

 

 

 

 

 

more....